Trilogy and the track

[Rokusek]

Yesterday was our First autox of the season, and I truly got to beat the piss out of these mounts for the first time in over a year.

I am extremely happy with how well they put the power to the ground and got rid of all the wheel hop and almost all the torque steer in the car. Four 3k launches off the line and no problems!!!

If your not beating the piss out of her, you'll never know how well she truly performs!!!

As always, Keep it up @jbarone;!!!

[mzr0818]

JBR FTMFW

[King Scumbag]

This is @jbarone; sitting back in his chair right now reading this after a rough st. pattys day weekend!

[rolanblack]

Rokusek... what shade of red did you go with? I like

[Rokusek]

It's orange.... Chevy Orange... Also known as Vermillion.

[rolanblack]

Originally Posted by Rokusek It's orange.... Chevy Orange... Also known as Vermillion.

Thank you sir. When i get them powdercoated, all props goes to you

[King Scumbag]

Iv been thinking of going some shade of Orange with me black juan…

[Rokusek]

All orange:

[King Scumbag]

umm….I see a blew filter!!!! NAWT all orange! lol I kidd i kidd! That looks sweet though!

Did you have this FMIC tubes painted black like that?

[JBR]

Wait until you see the filter and intake setup he's gonna have in a week.

[2.0t03speed]

Originally Posted by jbarone Wait until you see the filter and intake setup he's gonna have in a week.

Damn only a week? looks like i need to charge my camera lol

[Rokusek]

Originally Posted by SBMS316 umm….I see a blew filter!!!! NAWT all orange! lol I kidd i kidd! That looks sweet though! Did you have this FMIC tubes painted black like that?

Yes not all orange but soon

I had one of the locals blast and paint them black.

Originally Posted by jbarone Wait until you see the filter and intake setup he's gonna have in a week.

It's gonna be sick!!! I need it ASAP!! Lol

[King Scumbag]

Originally Posted by jbarone Wait until you see the filter and intake setup he's gonna have in a week.

Jamie, you guys should start doing "hydrographics" and dew some custom dipped parts! lol

Snake skin hydro dipped whale Peen FTW

[JBR]

Maybe a bit longer but much.

[JBR]

That's some pretty cool shit.

[Rokusek]

Best picture from my install

[Rokusek]

Update on the Mounts:

So last weekend was Mega Nator Meet, I raced down the drag strip 7 times and man did these mounts hold up well! It was one thing to have them on the autox track but having them on the strip with bald RS3's was another story!

Shifting was Flawless everytime. The motor stayed put in the car putting the power to the ground with supurb performance!

Launching came with ease, almost all my launces where right around 2500rpm and dumped the clutch (ACT PRolite)! Even with super sticky tires I had no wheel hop! This has alwasy amazed me with Jamies trilogy.

This weekend im going to break into the mounts to inspect the bushings and welds to see how they are holding up so far!

After 20k miles on the Mounts, they held up perfect, but now we are pushing 4500miles on the same mounts with new bushings (replaced when I had the mounts powder coated).

The performance aspect of these motor mounts is supurb! The engineering behind them is even more Outstanding than the performance!

I truly cant put into words how happy I have been with these motor mounts. All around amazing products!

As the Racing season continues I will update this thread as I go!

Again Thank you @jbarone; For your amazing parts awesome customer service and free shippping

[JBR]

Originally Posted by Rokusek Update on the Mounts: So last weekend was Mega Nator Meet, I raced down the drag strip 7 times and man did these mounts hold up well! It was one thing to have them on the autox track but having them on the strip with bald RS3's was another story! Shifting was Flawless everytime. The motor stayed put in the car putting the power to the ground with supurb performance! Launching came with ease, almost all my launces where right around 2500rpm and dumped the clutch (ACT PRolite)! Even with super sticky tires I had no wheel hop! This has alwasy amazed me with Jamies trilogy. This weekend im going to break into the mounts to inspect the bushings and welds to see how they are holding up so far! After 20k miles on the Mounts, they held up perfect, but now we are pushing 4500miles on the same mounts with new bushings (replaced when I had the mounts powder coated). The performance aspect of these motor mounts is supurb! The engineering behind them is even more Outstanding than the performance! I truly cant put into words how happy I have been with these motor mounts. All around amazing products! As the Racing season continues I will update this thread as I go! Again Thank you @jbarone; For your amazing parts awesome customer service and free shippping

And Thank You Sir! You can't get ^^this^^ kind of performance from a prosthetic insert.

[Rokusek]

Originally Posted by jbarone And Thank You Sir! You can't get ^^this^^ kind of performance from a prosthetic insert.

Exactly!!! And the side bushings being vertical instead of horizontal make a HUGE difference with keeping the motor in place as well as actually utilizing the bushings! The dogbone is one solid ass piece of equipment too!!! that thing keeps the motor in check from rocking forward and back!

Couldnt have made them any better Jamie!

[GunGuru727]

JBR FTW

[jdm_mica]

Like the wheels, only missing the TMM and I'll be fully mounted

[Manny]

not to mention the revised tripod for the transmission mount making installation much more easier and basically prevents all possible fail when installing.

[Manny]

bumpski for a stout product