THE OFFICIAL MSF NATIONWIDE DEALER AWESOME LIST

[starlilie]

This thread makes me sad...
Do I have to go to Orlando to get reliable friendly service?
No places in Tampa?

[breakfstincluded]

Herzog Meier Mazda.

Portland, Oregon.

Have noted motor mounts, BPV, intake as visible mods in service notes.

Did notice note spark plugs or HPFP internals or straight pipe.

Cool with bringing in my own oil for change/inspection as long as 5-30

Recently brought the car in for smoking turbo with only TIP stocked out.

Uninstalled AP as I always do beforehand, though this and TIP change seemed to cause my smoking to cease. No longer re-produceable with spirited driving and 40 minute idle. Noticed day before appointment.

Dealer had car from 7-4 while investigating service bulletin, found nothing.
Shuttle picked me up and brought me back, I was disappointed. 1.5 mile on odo btw from them, they told me they tested for smoking twice.

They had already decided to waive any service fees since I've had oil changes and an insurance claim for radiator shroud damage done there.

Said to keep them updated if I notice any changes.

[bobbylight707]

Originally Posted by yang_jackson mazda of oakland 2560 Webster St - Oakland, CA 94612 these guys stuck w/what they said they would do, and have given me kick ass service after i bought the car. ask for nick or john. tell em amos sent you.

How mod friendly are they? I'm planning on making some upgrades to my ms3 and im moving down to san jose so I'm trying to get a list of good dealers down there.

[motherfnmonsta]

Hickory Mazda Mitsubishi
1775 catawba valley blvd
Hickory nc

Awesome cause I am a tech there lol

[Kellerspeed3]

North Park Mazda
9333 San Pedro Ave.
San Antonio TX, 78216

I've had my K&N SRI, JBR RMM 88 duro, and my mud flaps installed there, all my oil changes 5w-30 full synthetic done there, when it's time for the tranny fluid they told me they will use the FoMoCo miracle juice no prob. Was told on the DL that they were cool with most bolt-ons but had issues with guys tuning wrong, blowing their engine, try to uninstall their AP's then bring it in and want a new engine under warranty, not gonna happen they say. Don't care what Cobb says they say they know when it's been tuned and untuned. I have an AP but I just use it for monitoring my live engine vitals. Wink, wink, I also leave my lights on a lot and need jumps, I'm such an airhead, or at least my dealership thinks so, I'm that big lovable guy that's always forgetting stuff. Anyways I haven't had one issue with warranty work at all, they fix whatever's not working and I sign some papers then I zoom-zoom outta there. Even the two techs I use drive speeds so I'm all good, love my NP Mazda!

[sidekick]

Someone should really organize this list by state or something. It would be way easy to see which dealerships are good in your state.

[cshunter]

Hilton Head Mazda
111 Drivers Way
Hardeeville, SC 29927
(843) 208-2400

Certified Speed & Rotary Mechanic. Mod Friendly. Also have deals with Corksport and Racingbeat.
@bwallace04 and @Evan2010speed3 They can vouch also. It was also bwallace04 who pointed me there.

[breakfstincluded]

Seattle University Mazda gave me a Ventilation kit with no fuss.

Like I don't think they even tested, I just told them and they gave me one lol.

[bwallace04]

Originally Posted by cshunter Hilton Head Mazda 111 Drivers Way Hardeeville, SC 29927 (843) 208-2400 Certified Speed & Rotary Mechanic. Mod Friendly. Also have deals with Corksport and Racingbeat. @bwallace04 and @Evan2010speed3 They can vouch also. It was also bwallace04 who pointed me there.

Well new service manager isn't all there, Myles the master tech will look out for you if you request that he do the work on your car. Fully bolted engine with gt2871 with 12 warranty is what's under my hood. Also my be thinking about going to work there myself.

[warpspeed3]

Ferman Mazda on Florida sold me my 08 Speed 3 in 2008 and have been great - very customer-friendly. They installed my CAI and have provided all service without a hitch. They are very personable and responsive to all my concerns. I've been dealing with them for over 15 years and have nothing but good things to say about them.

[Evan2010speed3]

Originally Posted by bwallace04 Well new service manager isn't all there, Myles the master tech will look out for you if you request that he do the work on your car. Fully bolted engine with gt2871 with 12 warranty is what's under my hood. Also my be thinking about going to work there myself.

Good place to go for sure. If you worked there, things would get stupid lol

[wette460]

+1 for Town North Mazda in Richardson, TX. They convinced the Mazda reps to pay for my VVT actuator and timing chain replacement with all of my listed mods on the car and without oil receipts. Carey, you are the fucking man!!

[kolosok17]

Tustin Mazda - Tustin, CA
28 Auto Center Dr
Tustin, CA 92782
(714) 832-6222

4.5 stars on Yelp (very rare for a dealer, as far as I know)!

Bought my car there. Everyone was very courteous and friendly. Didn't feel that the salesperson was trying to trick me into anything. Even explained the engine break-in period to me and informed me that I should get an oil change between 500-1000 miles (I knew this, but was nice to hear the dealer be knowledgeable about it).

[Zalligan]

Originally Posted by Cataphract_40 Bob Moore Mazda 13045 North Kelley Avenue Oklahoma City, OK 73131 (405) 749-6049 All the info you need is HERE, page 1 and page 6

Sorry to bump an old thread but I think keeping up to date on dealers is important.

I'll vouch for Bob Moore in OKC. I'm in right now and while I don't have anything done yet, I talked to one of the service managers and he said most mods are no big deal. Was told they don't like ECU flashing, but as far as intake, rmm, or STS or shifter bushings go,among other mods, they're no big deal. If you throw a cai on and suck up water you're sol, but as long as your mod doesn't directly cause something to fail, they'll work your warranty claim.

One of the service managers currently owns a speed3 and other salesmen in the dealership have owned and modded in the past. Service manager I talked to was talking about mods he had planned for his speed and said he likes getting to feel out mods (ex. Shifter bushings) on customers cars to see if it's something he'd like to do on his.

[Will915]

Suburban Mazda of Sterling Heights
40331 Van Dyke Ave Sterling Heights, MI 48313
(586) 698-5200

Took my car in because the ac drain line was clogged and leaking all over passenger side. While I was there, asked Mark if they would be willing to do my VVT since I was getting stationed in MS and had no dealers close to base if i encountered a problem with it. I have 30k Miles and no signs of bad vvt. No problem at all. Great mazdaspeed tech too knows the cars very well.

Service dept is extremely well managed. I have had good luck

Called the guys at Troy asking the same thing and they sounded like they didnt want to be bothered and that it would cost me 150 to diagnose, and if they found a problem they would do the work on it. Even though the service tech at sterling heights had told me it would have to be done 3 months before.

[levon.mark]

Continental Mazda Volvo (Continental Motors Alaska)
4800 Old Seward Hwy, Anchorage, Alaska 99503

Had my VVT and Turbo replaced with barely any questions asked at 63k miles (had it done in July 17, with warranty ending on 30th lol). The mechanic Chad is the one who helped me out. He somehow spotted me and came out and instantly looked at my car. He also told me what to say, so he can get me a new vvt kit!

So I recommend to ask for Chad.

As for modifications, you can basically go in full bolt on, and no one really cares. However, sometimes I see people who run meth kits, have some trouble. But Chad knows his cars, and he will try his best to get you to pay little or nothing. He is -the first I have met- an honest mechanic.

[JSmith]

Tustin Mazda - Tustin, CA
28 Auto Center Dr
Tustin, CA 92782
(714) 832-6222

Seconded. Sarah was very professional. Even owns a speed 3 herself she said.

[iceman32crx]

They have always completed recalls and TSB repairs without hesitation and helped me out with prices on maintenance and repairs out of warranty.

When I had my rx8, I went in to have my eccentric shaft seal replaced. I looked up the job beforehand, and found that there was a TSB out that notified dealers of a new shop tool that cut the job down from about 12 hrs down to 2! When I brought it in they didn't argue, but said they never saw the TSB and would look into it. After about an hour he called me back and said he had the tool on order and would receive it the next morning. The next day they finished the job and said "thanks for informing us about the TSB, we have another person in for the same thing and we informed her about the new procedure and we saved her money"!

Maybe they should have known about the TSB, but they didn't immediately turn me down and checked into my claim. Not many dealers will actually listen to customers.


Ferman Mazda

9809 E Adamo Dr, Tampa, FL 33619

(813) 623-6600


Sent from my iPhone using Tapatalk

[sidekick]

Oaktree Mazda
4250 Stevens Creek Blvd
San Jose, CA 95129
(408) 763-4071

Parts department is awesome, Sunny has helped me out numerous times getting parts at better than list price. Their service department has been great so far as well. I worked with Tim to get my VVT work done. He saved all of the old parts for me, installed my JBR PMM for free while doing the VVT and so far so good on the VVT work itself. They had my car less time than Capitol Mazda had my car to do a fucking EGR valve.

[:: Gusto ::]

Riley Mazda
75 Myrtle Ave, Stamford, CT 06902
(203) 978-5780

Love this place. Seriously. They are very mod-friendly, they installed my ACT stg3 Clutch, lowering springs & my old Magnaflow exhaust. They warrantied my car w/ even though they know I was running a pro-tune, & never complained about anything. The best part, is they have their own Mazda race team.

[Yousuf]

Originally Posted by mrFanel Fremont Mazda 39750 Balentine Drive Newark, CA 94560 1-866-639-6293 Sales - top notch team; I went in there and said "24K OTD" they sold it to me for 23.9K OTD; no haggling, no hassling, no pressure - nothing. Easy as pie. Went there a couple of times for programming of my "personalized" features and then for a TSB for drivers seat and both times their service manager, Brian, was absolutely awesome. On my second trip there, when they were executing the TSB on the seat, he was not sure of how long it would take so they just gave me a rental and told me to bring it back whenever (luckily they were done same day so it was pretty quick). Excellent service overall!!!

I just wanted to say that currently, Fremont Mazda is a piece of shit. They lost one of my cars keys and so I didn't have a spare key for the longest time, until they finally decided to make me a new one. Also when I went in for them to check the rmm, they said everything checked out ("we checked all the mounts"). They also said the only thing that could be making some kind of noise was my cs intake, yeah right. When I actually did replace that rmm, it turned out to have a tear in the bushing. Fast forward to recently, and they wouldn't replace the right-side knuckle just because the car had coilovers on it. "I don't wanna get my techs into that." How stupid are your techs if that even makes a difference to them? Only Dublin Mazda has been of any help to me.

[Kyle Undefined]

Originally Posted by sidekick Someone should really organize this list by state or something. It would be way easy to see which dealerships are good in your state.

Ask and you shall receive.

Forgive the mess, just a scrape and data dump sort in Excel... Also fuck you faggots who wrote a goddamn novel.

Oh, and this should cover all the posts, old and new.

_________________________________

Alaska

Submitted by: levon.mark
Continental Mazda Volvo (Continental Motors Alaska)
4800 Old Seward Hwy
Anchorage
AK 99503
Had my VVT and Turbo replaced with barely any questions asked at 63k miles (had it done in July 17, with warranty ending on 30th lol). The mechanic Chad is the one who helped me out. He somehow spotted me and came out and instantly looked at my car. He also told me what to say, so he can get me a new vvt kit! So I recommend to ask for Chad. As for modifications, you can basically go in full bolt on and no one really cares. However, sometimes I see people who run meth kits have some trouble. But Chad knows his cars, and he will try his best to get you to pay little or nothing. He is -the first I have met- an honest mechanic.

_________________________________

Arizona

Submitted by: evidence
Cardinale Way Mazda
6343 E Test Dr
Mesa
AZ 85206
(800) 658-0839
*Josh is the suggested tech to deal with.

_________________________________

California

Submitted by: glocK23
Riverside Mazda
8330 Indiana Ave.
Riverside
CA 92504
service: (888) 859-5879

Submitted by: yang_jackson
Mazda of Oakland
2560 Webster St.
Oakland
CA 94612
(866) 838-3333
*ask for Nick or John. Amos is the ref.

Submitted by: TheMarsVolta
Hine Mazda
42050 DLR Drive
Temecula
CA 92591
(866) 204-0278; (866) 204-0278;
*Mod friendly

Submitted by: mrFanel
Fremont Mazda
39750 Balentine Drive
Newark
CA 94560
1-866-639-6293
*see post for details

Submitted by: Say Chi Sin Lo
Putnam Mazda
65 California Drive
Burlingame
CA 94010
(650)558-5644
*Ask for Matt Sammut
he's the manager for the service/parts department, Mod friendly, he'll even advise you on mods.

Submitted by: kolosok17; jSmith
Tustin Mazda
28 Auto Center Dr
Tustin
CA 92782
(714) 832-6222
4.5 stars on Yelp (very rare for a dealer as far as I know)! Bought my car there. Everyone was very courteous and friendly. Didn't feel that the salesperson was trying to trick me into anything. Even explained the engine break-in period to me and informed me that I should get an oil change between 500-1000 miles (I knew this, but was nice to hear the dealer be knowledgeable about it). Seconded. Sarah was very professional. Even owns a speed 3 herself she said.

Submitted by: sidekick
Oaktree Mazda
4250 Stevens Creek Blvd
San Jose
CA 95129
(408) 763-4071
Parts department is awesome, Sunny has helped me out numerous times getting parts at better than list price. Their service department has been great so far as well. I worked with Tim to get my VVT work done. He saved all of the old parts for me, installed my JBR PMM for free while doing the VVT and so far so good on the VVT work itself. They had my car less time than Capitol Mazda had my car to do a fucking EGR valve.

_________________________________

Colorado

Submitted by: edowney4711
Mazda of Lakewood
7999 West Colfax Ave
Lakewood
CO 80214
Sales: 888-472-8555
Service: 888-481-9966

_________________________________

Connecticut

Submitted by: efispeed
colonial mazda
100 C Federal Road
Danbury
CT 6811
phone: 203-748-8700
mod friendly and will even perform installs, knowledgeable techs

Submitted by: :: Gusto ::
Riley Mazda
75 Myrtle Ave
Stamford
CT 6902
(203) 978-5780
Love this place. Seriously. They are very mod-friendly, they installed my ACT stg3 Clutch, lowering springs & my old Magnaflow exhaust. They warrantied my car w/ even though they know I was running a pro-tune & never complained about anything. The best part is they have their own Mazda race team.

_________________________________

Florida

Submitted by: clos561
Royal Palm Mazda
9305 Southern Blvd.
Royal Palm Beach
FL 33411
service: (561) 370-7170
*They must install modifications

Submitted by: CherryMicaChick06
Cory Fairbanks Mazda
400 US Hwy 17-92 North
Longwood
FL 32750
(800) 807-5198
*Biil and Ricky are the recommended techs to deal with.

Submitted by: iceman32crx
Ferman Mazda
9809 E Adamo Dr
Tampa
FL 33619
(813) 623-6600
They have always completed recalls and TSB repairs without hesitation and helped me out with prices on maintenance and repairs out of warranty. When I had my rx8, I went in to have my eccentric shaft seal replaced. I looked up the job beforehand, and found that there was a TSB out that notified dealers of a new shop tool that cut the job down from about 12 hrs down to 2! When I brought it in they didn't argue, but said they never saw the TSB and would look into it. After about an hour he called me back and said he had the tool on order and would receive it the next morning. The next day they finished the job and said "thanks for informing us about the TSB, we have another person in for the same thing and we informed her about the new procedure and we saved her money"! Maybe they should have known about the TSB, but they didn't immediately turn me down and checked into my claim. Not many dealers will actually listen to customers.

Submitted by: 08JD
Classic Mazda
2075 North Semoran Blvd.
Orlando
Fl 32807
(888) 292-3451

_________________________________

Georgia

Submitted by: Swagerwagon03
Jim Ellis Mazda Atlanta(chamblee)
5855 peachtree industrial blvd
Atlanta
GA 30341
770-234-7974
"Thomas in sales is a great guy go see Thomas for a great and friendly experience!"

_________________________________

Illinois

Submitted by: Saskatchewan17; long101
Bigger's Mazda
1320 East Chicago Street
Elgin
IL 60120
(847) 628-6000

Submitted by: JTMS3
Rosen Mazda
855 West Grand Avenue
Lake Villa
IL 60046
(847) 245-7600
Srv Mgr: Arnold - mod friendly
GM: Ed - awesome guy
Parts Mgr: Dan - knows his shit
not just parts!
Sales rep: Marion
Techs: awesome and can explain things pretty well if needed.
All my experience after 4 MZs purchased from there.

_________________________________

Indiana

Submitted by: DaAznKnight
Tom Roush Mazda
525 David Brown Drive
Westfield
IN 46074
(800) 891-7084
*Ask for Mike Elkins as the service tech
op has service history spanning his previous vehicle
see post for details.

_________________________________

Massachusetts

Submitted by: dougefresh_
Liberty Mazda
81 Bay State Road
Wakefield
MA 1880
877-278-0163
Only deal w/ Tom Robinson

_________________________________

Maryland

Submitted by: volodya84
Congressional Mazda
801 Rockville Pike
Rockville
MD 20852
Sales: (800)784-9879; Service: (888) 693-9071
*mod friendly as long as there are no direct issues due to installation

_________________________________

Michigan

Submitted by: mrcarey
Siemans Mazda
2712 Niles Avenue
Saint Joseph
MI 49085
Phone: 269-982-4113 - Fax: 269-982-4128;
Siemens is my Mazda dealer... they are a tiny Mazda dealership in Southwest Michigan. However, they are a true diamond in the rough. WARNING: Given their size, they are NOT a Speed dealer so warranty work is not covered. However, if you're out of warranty... they are VERY mod friendly. They've put a number of parts on my car with great enthusiasm. I've also have never felt like I've been overcharged. Their Service Manager Ron is great at getting me in... sometimes the same day I call. Their master service technician, Dave is a Mazda national award winner multiple times over. He's bright, a perfectionist and fast. I can't say enough about Dave. So if you're in the area check them out...

Submitted by: Will915
Suburban Mazda of Sterling Heights
40331 Van Dyke Ave
Sterling Heights
MI 48313
(586) 698-5200;
Took my car in because the ac drain line was clogged and leaking all over passenger side. While I was there, asked Mark if they would be willing to do my VVT since I was getting stationed in MS and had no dealers close to base if i encountered a problem with it. I have 30k Miles and no signs of bad vvt. No problem at all. Great mazdaspeed tech too knows the cars very well. Service dept is extremely well managed. I have had good luck, Called the guys at Troy asking the same thing and they sounded like they didnt want to be bothered and that it would cost me 150 to diagnose, and if they found a problem they would do the work on it. Even though the service tech at sterling heights had told me it would have to be done 3 months before.

_________________________________

North Carolina

Submitted by: Dizzel
Montgomery Mazda
6735 E Independence Blvd
Charlotte
NC 28212
Local 704-563-1510; Toll Free 1-800-223-5439
*All around friendly and helpful dealership
light mods: ok
heavy mods: unknown

Submitted by: motherfnmonsta
Hickory Mazda Mitsubishi
1775 catawba valley blvd
Hickory
NC 28602
Awesome cause I am a tech there lol

_________________________________

New Hampshire

Submitted by: TQJUNKIE; cdyer603
Grappone Mazda
506 State Rt. 3A
Bow
NH 3304
(800) 528-8993
Talk to Seth
*see post for details

_________________________________

New Jersey

Submitted by: doubleflusher
Crystal Mazda
220 Route 22
West Green Brook
NJ 8812
service: (888) 575-8169

Submitted by: superskaterxes; Kdawg207
Hamilton Imports
2200 - 2201 Route 33
Hamilton Square
NJ 8690
Phone: (888) 758-3668

_________________________________

New Mexico

Submitted by: thanox2; xxandrossxx
University Mazda
5150 Ellison. NE
Albuquerque
NM 87109
(505) 761-1900

Submitted by: knarfalvarez
car max
5500 Alameda Boulevard Northeast
Albuquerque
NM 87113
(505) 858-2438
*see post for details

_________________________________

New York

Submitted by: Darksun280
Country Mazda
331 W. Jericho Turnpike
Huntington
NY 11743
service: (631) 271-6745

Submitted by: Grumpyjap
Compass Mazda
200 Dolson Avenue
Middletown
NY 10940
(845) 344-4440
I have a fully bolted car and I have yet to run into a problem getting a warrenty item fixed. a/c compressor/belts, turbo smoking(I had did have to remove the flashes from the ecu, but everything else remained on the car), and a few other warrenty issues I had. Great bunch of guys, ask for Marco in service and let him know Storm refered you. They will treat you well.

_________________________________

Oklahoma

Submitted by: Cataphract_40
Bob Moore Mazda
13045 North Kelley Avenue
Oklahoma City
OK 73131
(405) 749-6049

_________________________________

Oregon

Submitted by: breakfstincluded
Herzog Meier Mazda.
4275 SW 139th Way
Beaverton
OR 97005
(503) 644-9121

_________________________________

Pennsylvania

Submitted by: FileNotFound
John Kennedy Mazda
1403 W Ridge Pike
Conshohocken
PA 19428
(800) 906-5941

_________________________________

South Carolina

Submitted by: cshunter
Hilton Head Mazda
111 Drivers Way
Hardeeville
SC 29927
(843) 208-2400
Certified Speed & Rotary Mechanic. Mod Friendly. Also have deals with Corksport and Racingbeat.
@bwallace04 and @Evan2010speed3 They can vouch also. It was also bwallace04 who pointed me there.

_________________________________

Tennessee

Submitted by: Travis
Wyatt Johnson Mazda
Wilma rudolf rd
Clarksville
TN 37042

_________________________________

Texas

Submitted by: gsrtype1
Gullo Mazda
750 I-45 South
Conroe
TX 77304
(936) 441-9100

Submitted by: I<3Groceries; fyrecrotch
Town North Mazda
307 S Central Expressway
Richardson
TX 75080
main: (866) 308- 8830

Submitted by: baluums3
Mazda South
4506 IH25 South
Austin
TX 78745
(512) 462-3131

Submitted by: fyrecrotch
Miller Mazda
3000 IH 35 South
Waco
TX 76706
(254) 662-3610
Technician: Jake

Submitted by: 2010Speed3
Gullo Mazda
750 I-45 South
Conroe
TX 77304
(936) 441-9100
I actually had shaft play in my turbo. I'm pretty sure he knew that I used to have an intake and race pipe, but he I replaced them before taking them in. The morning after I took the car in, they told they would replace it. They got the turbo in on a Monday (3 days after they said they would fix it) and had it done that afternoon. So 5 days to replace a turbo! Great turn around and they didn't really mind the catback, rear motor mount and other minor mods I had.

Submitted by: b_warman
Mazda of Mesquite
15900 LBJ freeway
Mesquite
TX 75150
(888) 505-3420
My purchase experience was great, both my salesman (Corey) and my finance guy (Jeff drives a MS3) were very knowledgeable of their cars, the dealership is mod friendly and they want me to come back once I've started working on the car to show it off. They are also S-plan friendly another dealership in OK (that had the blue MS3 I wanted) wanted nothing to do with me or the S-plan pricing, but it's ok I got their car anyway.

Submitted by: Kellerspeed3
North Park Mazda
9333 San Pedro Ave.
San Antonio
TX 78216

Submitted by: SLS MS3
Freeman Mazda
1850 E. Airport Freeway
Irving
TX 75062
Phone: (972) 438-2121

Submitted by: AequitasVeritas
Hiley Mazda of Hurst
625 NE Loop 820
Hurst
TX 76053
817-701-1000;
*super friendly to mods will even correct your fuck ups

_________________________________

Virginia

Submitted by: Addikted To Boost
Lynchburg Mazda
3404 Old Forest Rd
Lynchburg
VA 24501
(434) 385-7736

Submitted by: BlueDmnSpeed
Rosenthal Mazda of Arlington
750 N. Glebe Rd
Arlington
VA 22203
877-446-6543
awesome service departments. and as far as i know you return to stock for a warranty visit you won't have any problems

Submitted by: ABSpeed3
Browns Fairfax Mazda
10570 Fairfax Blvd Fairfax
VA 22030
(703) 385-8170;
I live in Manassas, but I make the drive to visit this dealer. I never stock out for services, and Taylor with the Red team even compliments my wheels and talks to me about previous cars he's owned (S2k, Evo, STi, etc). I always just flash my AP to stock and I've never had any problems. Mod friendly dealer

_________________________________

Washington

Submitted by: mpgti
Mazda of Everett
10630 Evergreen Way S.
Everett
WA 98204
Phone: 888-871-8777 ; Phone: (888) 758-3668

_________________________________

West Virginia

Submitted by: stephani3
Lester Raines Mazda
5111 Maccorkle Ave
Charleston
WV 25309
service: (304) 768-1251

_________________________________

Quebec

Submitted by: theurgy
Elite Mazda
1205 boul. La Verendrye Ouest
Gatineau
Quebec
J8T 8P2
Toll Free: 1 866 304-3041
Note: Best dealership I have ever had the pleasure of dealing with. Service Manager Cliff is mod friendly and a sponsor of the local Ottawa Mazda Club. Heavily involved in the local enthusiast community, also the facilities of the dealership are by far the best I've seen from a Mazda Dealership. If you're local, I suggest joining the local OMC cause they offer great discounts to members.

[Miltron]

I can vouch for :

Mazda of South Charlotte
6501 South Blvd, Charlotte, NC 28217
(888) 904-8191
Ask for Ryan (Service Manager) Real cool guy

[speedfreak44]

Mazda of Wesley Chapel
26944 Wesley Chapel Blvd, Wesley Chapel, FL 33544

Took car in for alignment issues, rim issue, door lock problem, mirror cover replacement

Car had full intake, downpipe, tip, rmm

Guys never once gave me any issues on anything. They actually detailed my car for free once inside and out. Great people. Replaced any faulty things under warranty. They told me they did not think my mirror covers would get replaced (15k miles paint chipped mostly off) but that they would try and they contacted corporate mazda and got it approved.

[M4Nathan]

28 Auto Center Dr
Tustin, California
(800) 626-2932
Orange County New Mazda & Used Car Dealership Tustin | Serving Huntington Beach, Santa Ana & Irvine | OC Mazda

Ask for Sarah. She has owned multiple modified Speed3's and is super easy to talk to. She clearly cared about the well being of my '09 Speed3. I've really only had basic maintenance performed, but she was aware of all my bolt-ons and would rather discuss them then argue about having them. Also has packaged deals and given me coupons/ discounts when possible. Overall great service and I use them whenever I'm not doing the work myself.

[Jellikit]

Thanks for this thread and putting the "state" list together. Seems like if one is on a road trip and in need of service away from home, that this should come in handy.
Now if I can find in this forum some good tuning/custom shops to start putting a couple extras on the ride.

[Marcus]

I`ll put a good word in for:

Freeway Mazda
Surrey BC Canada

They`ve done the majority of work on my car, from all the mounts in my sig with a good mention to sticking to a four hr quote on my diff brace and mount when it was closer to a 9hr job, and generally overall, do good work. I think I`ve only had to go back once for when I had an oil change and they put non synthetic in since thats the default apparently and I had no notes in my file and they still did that no charge on the fly once I got back there.

Also, Steve in the parts dept used to rebuild turbo`s and is a good guy to randomly email.

[danb]

North Towne Mazda
Sheridan Dr. Amherst NY

bought a speed3 end of january. 65k on it, salvage title. drove it home and called mazda usa about the vvt warranty that ended in 2012. they had me take it in for inspection to my mazda dealer.
because ive owned 5 mazdas, currently have 3, mazda usa wanted to do everything they could to help and are covering the full price...total parts labor come to 1510.00