Ultimate Guide to Parameter Monitoring?

[NCZ13]

on my main screen I monitor LTFT, Fuel pressure, ECT, intake temp, manifold pressure and AFR.

I really primarily only pay attention to LTFT and fuel pressure, but I will notice if my other parameters are off.

[Sid3wayS]

Originally Posted by NCZ13 on my main screen I monitor LTFT, Fuel pressure, ECT, intake temp, manifold pressure and AFR. I really primarily only pay attention to LTFT and fuel pressure, but I will notice if my other parameters are off.

And what are the readings you normaly have for those parameters.

[NCZ13]

Originally Posted by Sid3wayS And what are the readings you normaly have for those parameters.

LTFT fluctuates and depends on your mods and if youre tuned or not.
Ideally you dont want to see anything +/- 8 on any tune, but with a good maf cal it should always be around +/-2

ECT will depend on whether you have a front mount or not. Now that my front mount is off, I never see it over 200, whereas with my front mount seeing high 190s to low 200s was pretty common

Intake temps depend on your local ambient temperatures

fuel pressure is 420ish at idle and 1600+ at WOT

manifold pressure and AFR idk off the top of my head, I dont really pay attention to them. in fact, im not even sure if I still have AFR on my main screen still.