Intakes Now Available!
 

For all of you out there who have been patiently waiting for this information...here it is!

We have officially released the following new products for the Mazdapseed3:
-3.5" Full Intake System
-3.0" Full Intake System
-3.0" MAF Housing w/ Integrated Honeycomb Air Straightener
-3.0" MAF Housing Kit

(We'll be releasing our 4.0" Intake Systems on March 1, 2013) For now...more teaser pics.
http://i50.tinypic.com/6yeirc.jpg http://i46.tinypic.com/2mr74me.jpg

Check out all the details below.

UPDATE: All intakes are shipping with AEM Dryflow Filters. If you have any questions feel free to shoot us a PM or e-mail.


HTP 3.5" Intake System
-Full 3.5" one-piece intake pipe
-Integrated MAF with secured honeycomb air straightener (MAF ID 3.37")
-AEM Dryflow Air Filter
-Complete hardware kit (2-barbed fittings, 2-plugs, coupler to turbo, stainless steel t-bolt clamps, hoses)
-Black wrinkle powder coat finish (standard)
(compatible for Mazdaspeed6 when installed with our MS6 51R or Small Battery Trays- contact Katie for Special Combo Pricing)

3.5" Intake & 51R Battery Tray Combo Pack

http://i46.tinypic.com/jinn8p.jpg http://i49.tinypic.com/jrb4fk.jpg



HTP 3.0" Intake System
-Full 3.0" one-piece intake pipe
-Integrated MAF with secured honeycomb air straightener (MAF ID 2.87")
-AEM Dryflow Air Filter
-Complete hardware kit (2-barbed fittings, 2-plugs, coupler to turbo, stainless steel t-bolt clamps, hoses)
-Black wrinkle powder coat finish (standard)
(fully compatible with Mazdaspeed6 with stock battery tray)

3.0" Intake & 51R Battery Tray Combo Pack
http://i48.tinypic.com/34opjdl.jpg http://i49.tinypic.com/ht5zeo.jpg



HTP 3.0" MAF Housing
-Integrated with secured honeycomb air straightener (MAF ID 2.87")
-Polished aluminum finish (standard)
http://i45.tinypic.com/350t368.jpg http://i55.tinypic.com/2w2fpsy.jpg


HTP 3.0" MAF Housing Kit
-3.0" MAF Housing with secured honeycomb air straightener
-3.0" 45 Degree Silicone Elbow (with the option for a 3.0-2.5" reducer elbow)
-AEM Dryflow Air Filter
http://i47.tinypic.com/21ozo9e.jpg


Also available in our store:
HTP 3.0" Intake Kits featuring:
-Our 3.0" Turbo Inlet Pipe
-Our 3.0" MAF Housing w/ secured air straightener
-45 Degree Silicone Elbow
-AEM Dryflow Air Filter
http://i48.tinypic.com/5z3cid.jpg

Looks great, guys! My 3.5" system shipped today. I have a friend who went up over 40 grams/second with another 3.5" intake system, so I'm eager to install you guys' on my car ASAP!

Also, AWESOME prices!

Very nice! Will be ordering one of the 3" intakes with battery tray combo packs shortly to pair up with the new BNR S3.

Fuck yes! I've been waiting for this... I'll be ordering a full 3" in a few months.

Patiently waiting for MS6 goodies... :D

I was hoping this announcement would be coming! Was ready to order, but I may wait for the dry flow option. Which brand of dry flow will you be shipping?

Will intro pricing last until they come in?


Tappin

YESSSSS :32:

I was waiting for this!

Will be buying a full 3" during my next trip to you glorious country.

Speed6 owner rejoice at a quality 3" intake that's not $400+

Thanks guys!!!

I have been running a htp 3.5in for over a yr with no issues.... I also have the 51r battery box..... I can tell you, having my motor build by them and rocking a ton of their parts..... There is no better quality than Matt's workmanship.

Unlike many companies that produce items for the mazdaspeeds, Matt personally makes everything you see and is unwilling to sell something that is less than perfect.

Oh I want 3.5 inches so bad!!

(someone say it)

I Tapped that

Finally full 3" intake for great price.
Only question is will this fit MS6 with standard battery?
If answer is yes, ordering it right now! :)

HTP 3.0" Intake System - Hi-Tuned Performance Products


edit:
It fits!? Yessss :D

HTP 3.0" Intake System (Introductory Price: $240.00 w/ free shipping)
-Full 3.0" one-piece intake pipe
-Integrated MAF with secured honeycomb air straightener
-K&N Air Filter
-Complete hardware kit (2-barbed fittings, 2-plugs, coupler to turbo, stainless steel t-bolt clamps, hoses)
-Black wrinkle powder coat finish (standard)
(fully compatible with Mazdaspeed6 with stock battery tray)


EDIT 2:
ORDERED!! :)

Any way to order without a filter?

Yes!! I'll be getting a full 3" as soon as those dry-flow filters are available

Hmm, I really like the 3.5", might have to save up for this.

Any one have any idea if I would see much in the way of gains on a K04 over my CP-E CAI and 2.5" TIP? I cant seem to find the diameter of the CP-E CAI.

Noticable.

Me too, (sad face) oh and that 3.5" intake!

tappy tap

Ack! I ordered too soon!

tapawhat

I see what you did there ;)

I Tapped that

does the 3" intake clear the stock battery box/ECU in the speed3 or does the ECU have to be relocated?

Like with our 3" TIP, the 3" intake fits with the stock battery box and does not require that the ECU be relocated. However, the lower ECU cover does need to be removed.

Katie

Also, any fitment issues with the stock or aftermarket tmic?

tappy tap

I would also like to know this, I'm pumped to get this in. Was just wondering what brand/spec of dryflow you're planning on so I can decide whether to order an AEM or not.

Thanks for getting this out there!

We'll have the AEM Dryflow filters back in stock on Tuesday, Jan. 8, so if you're wanting the AEM over the K&N we'll have them ready to roll out the door on Tuesday.

Katie

I havent really done much searching, but whats the advantage/disadvantage for dry vs oiled? Dry seems like the way to go from what I can tell.

In terms of flow they are similar it comparing AEM to K&N. However in terms of cleanliness and maintenance dryflow is better. Coating the MAF in oil is no fun either.

Yeah thats kinda what i was reading. Why would any one go oiled?

The integrated and secured maf straightener is a really nice feature. I am still enjoying my battery box and 3" TIP.

I'm trying to decide if I want the 3 or 3.5...... Hmmmm I'm so close to pushing the button

Sent from my SCH-I535 using Forum Runner

reducing PR in front of the compressor of any turbo is nothing but goodness...and a larger intake does just that.

will be ordering the 3.5" and batt tray before the end of the month

I'll just leave this right here...

http://i74.photobucket.com/albums/i2...ps5d226d62.jpg

OK thats just sexy. I need to start saving.

Sent while "doing the speed limit"

That just made me pre-cum

EDIT: Whats the extra bung for?

Vacuum line and valve cover recirc tube

The AEM Dryflow filters are in today so all intakes will be shipping out with those. Let us know if you have any questions!

3" ordered!, will take picture of how it fits with stock tray. I would feel bad about replacing a 2 year old battery, seems mean. Looking forward to it.

Do you stock 3/8" NPT x 5/8" OD Barbed 90*, instead of the normally supplied 45*?

WHY GOD DAMN I would have been all over the 3.5 if it knew you guys were releasing this! Now i'm stuck with my sure ID 300 and need to buy an TIP from you guys! :smashfreakB:

I'll be ordering my 3" in the next week or 2. It'll be good to see some pics of it installed.

Yes we sure do!

Katie