Injector seals solution - Gen 2

[SleeperHatch]

Well since no info has been posted I'm still sketchy about them but can't wait to see results

[Tokay444]

I just want to see the actual part since everything I find is different.

[ak_spray]

Yeah I'm still wondering what they are going to look like. When I get them I'll post pictures ASAP I just don't see how these could compete with the CPe Seals considering they come with the brass sleeves.

[06Speed6]

Im not sure that the sleeve is completely necessary, the injector is held in place fairly well. The sleeve does not function as a seal.

[djuosnteisn]

Has anybody got these in yet? I'll try a set in my 3.

[Dano]

I too plan to spend ~$8 + shipping to try them...it can't hurt

http://www.toyotapartszone.com/oem/t...177-64010.html

[djuosnteisn]

Shipping was over double what the seals cost, lol.

[Dano]

lol..

ok so we need a GB who's interested? This is prab premature until someone tries them out but well worth it.

hell even with the shipping it beats the hell out of CPE and DFDD seals

[Enki]

This look about right?

1-10 $7.75
11-20 $7.50
21-100 $7.25

[Dano]

lol yes look at how massive the price drop is....


I was more referring to shipping them to one place for the 10-20 they will change then put them into an envelope and distribute them for pennies to each individual.

prab too much of a pain once you think about it...

nvrmnd

[Enki]

Actually that would probably work just fine, provided the envelope was good enough. Perhaps have one buyer for each city, whom then distributes at meets or something.

"Hey man, you got seals?"
*scratches arms and shakes like addict*

[ak_spray]

I'll donate mine to djuosnteisn if he bumps me up the Perm list. Nah just joking but I was just interested what they would be like I had no plans on putting them in the car because I couldn't do it and if they were to fail I couldn't have my speed down long enough to fix it. PM me dj and when I get them I'll send them to you in an envelope.

[djuosnteisn]

No worries, i already ordered them. I'll install them in a few weeks or so, let you guys know how they work.

[Nitr0EngiE]

i think the full boot style from cp-e will be a better longer lasting seal.

[Tokay444]

At this price you could change them every month for over a year and still wouldn't pay as much as the safe seals.

[Erich]

Of course the problem with that is the time it takes to pull everything to get to the seals.

[radbrad]

My seals are going.. Subbed for
Results.

[Nitr0EngiE]

yah i understand it just seems the boot style is more supportive and cant move and you dont gotta worry if its sitting flush or center.
and as the smart one stated above getting to them ... yah umm full fucking day project

[Dano]

all of the above is true of course but how many hours...ahem lets say minutes of pressure beyond OE get exerted on the seals in a DD environment at modest HP levels....time will tell but at 400WHP these might go 30K miles or a lifetime without failure...at 640WHP on the other hand I'd go with a SafeSeal...lol

[phate]

We will know soon enough. I think it is very valuable to at least test them, and it is far too early to write them off. Who knows - they might work better than the other seals that are exponentially more expensive. The only reports we have, thus far, are positive (OP).

[cld12pk2go]

Still rocking the stock seals here...

But these could be interesting...

[phate]

Originally Posted by cld12pk2go Still rocking the stock seals here... But these could be interesting...

lol, me too!

[Dano]

suuuuuush...me too but don't want to jinx them.

[Erich]

Originally Posted by Dano all of the above is true of course but how many hours...ahem lets say minutes of pressure beyond OE get exerted on the seals in a DD environment at modest HP levels....time will tell but at 400WHP these might go 30K miles or a lifetime without failure...at 640WHP on the other hand I'd go with a SafeSeal...lol

I would be inclined to go with the ones that are tested at 640.

[charlesfist]

Originally Posted by Erich I would be inclined to go with the ones that are tested at 640.

was it these ones?

[frodaddyweez]

subbed for results too...thanks for the awesome find

[08cosmic3]

Subbing.

[snowms3]

double subbing

[Nitr0EngiE]

Originally Posted by Erich I would be inclined to go with the ones that are tested at 640.

your running safe seals right?

thats what im using

[Erich]

Originally Posted by Nitr0EngiE your running safe seals right? thats what im using

I am running PTP seals.

[Babyface]

Hmmm, I wanna see how this turns out

[spnkr21]

Originally Posted by Erich I would be inclined to go with the ones that are tested at 640.

Tested at 640 once.
And 8million rpms

[HPFPUPGRADE]

Originally Posted by 06Speed6 Im not sure that the sleeve is completely necessary, the injector is held in place fairly well. The sleeve does not function as a seal.

Actually, the sleeve does work as a second seal.

Still, it will be interesting how these turn out.

Originally Posted by spnkr21 Tested at 640 once. And 8million rpms

Correct, 640 one time and then:

617
611
609
603
590
573

in just two hours on the dyno. This doesn't include the 100 + times they have been tested at 500 + WHP on the street and dyno with the old set up. Erich has abused his seals so much that even I am surprised they have lasted this long.

[Dano]

interesting post is interesting....

[Enki]

Originally Posted by HPFPUPGRADE Erich has abused his seals so much that even I am surprised they have lasted this long.

I know that quoting only this is a low blow, but it's not showing a lot of confidence in your product on your part.

Just sayin.

[Erich]

Originally Posted by Enki I know that quoting only this is a low blow, but it's not showing a lot of confidence in your product on your part. Just sayin.

More a case of him being happy to get the real world testing I am sure.

[HPFPUPGRADE]

Originally Posted by Enki I know that quoting only this is a low blow, but it's not showing a lot of confidence in your product on your part. Just sayin.

Understood, but we had no idea of what they were capable of in real world testing. I was equally surprised that we made it to 640 WHP so easy on pump gas + meth. Every time we get on the dyno, everyone is amazed at how the car performs. The dyno operators is open mouth slacked jawed with how smooth the power curve is and how clean it sounds during a pull.

We are breaking into new territories with the MZR engine, so every time we set a new bench mark... I am surprised.

[silvapain]

Still on stock seals here, too.

I'm interested in these seals, but replacing them is a job I'd want to do just once.


Tapadatass

[GLORIFIEDBOZO]

subbing

[djuosnteisn]

my seals still haven't shown up yet..... grrr...


I'll probably throw em on in the next few weeks though. My 3 is already starting to exhibit false KR in the higher rpms, and i can smell exh/fuel after boosting some.