Under route hot pipe
 

I noticed y'all have a one piece hot pipe available with your FJ built big turbo kit but was wondering if you could sell the hot pipe alone made to fit the stock k04? Also wondering if a cold pipe made to fit a tr8 core could be made as well?

The under the motor kit will only work with Big turbos, our 1 piece cold pipe will work. I apologize about the roughness of the website, we're having a new one designed and should be up and running with all of the new options in a few weeks. We will have a new ic piping kit coming out soon as well for the ms3.

Thanks
Matt@FJ

I was unable to find your 1 piece cold pipe. The website is a bit rough, but I'm very interested in your under route piping since HTP seems to have jumped ship on their kit so I'm trying to assemble my own. I understand JBR has their own kit out but I've had bad luck with silicone couplers/intakes/etc and wish to stick with aluminum. Any idea on a time frame for the kit? I've been holding out for a couple months now and I'm getting more and more impatient.

The kit is available now. Send us an email at sales@FJperformanceinc.com and we will get one out to you! Again sorry about the website

[emoji12] [emoji12]

Sent from my SM-N900V using Tapatalk

I'm looking forward to receiving my monster FJ Performance Inc built Freektuned MS3 monster. It's going to be epic!

Sent from my SM-N900V using Tapatalk

How did HTP jump ship on their kit?

Ahh maybe i went too far as to completely say that but in another thread that dated back months ago it was always with the "it will be avalibe soon." Kinda pulled the two weeks on the meth tank as well but it's just my opinion, everyone's entitled to their own.

It has been released. Look on their site. I am running it. The FJ kit is cheaper although and is 1 piece which is a + in my book.

Sorry again, i should have been more specific. They had posted a few teaser pictures of a core with their branding on it as well as mentioning a full hot/cold pipe, and k04 clocking kit. Unless i missed all that on their site then i don't believe it's been released or mentioned recently.

maybe you should have actually looked? HTP Mazdaspeed3 Under-Route Intercooler Piping- Hot Side (Big Turbo Applications Only) - Hi-Tuned Performance Products

I run the FJ one piece hot pipe its really nice. Its really close to the passenger side half shaft, but I made it all work. I will say I think it helped spool and with only 2 couplers to blow on that side, its nice. Also a fan of only having one 90 degree bend (right before the ic)

I have a DIY cold pipe with too many couplers so a cold side would be soething I might be interested in.

Maybe you didn't read my whole post... I was talking about a FULL kit. Meaning hot,cold pipe, core, and brackets for clocking the turbo. They had talked about releasing a complete kit a couple times in another thread. Which i had mentioned previously as well but no further information has been hinted at and it's been a few months since then.

None the less, got my full kit from FJ for a damn good deal so i couldn't be happier.
The hot side is a 2 piece pipe with a coupler near the intercooler to adjust for core location and the cold pipe is a single piece.

Maybe you should have actually read his post...

ya maybe

Maybe we should just be glad another vendor has joined and is continuing to produce quality parts for our platform. Cheers! :beerchug: